This ergonomically designed mixer is specially shaped for efficient stirring and incorporates a particle crusher. It is invaluable when making up solutions either from liquid concentrates or from dry powdered chemicals.

Can be disassembled and the filter reversed for flushing, 20 micron filter removes most water-borne dust and dirt; Replaceable filters available, fits most modern tap sizes.

Quick and efficient film washing, Fits most domestic taps; Designed for Paterson Super System 4 tanks.

Paterson Mixing Jugs

Tough polypropylene moulded jugs designed to make mixing and measuring of chemical solutions very easy. They are resistant to all photographic chemicals and each is graduated in metric, Imperial and US scales.

Moulded handles provide a firm grip, even with wet hands; Graduated in metric, Imperial and US scales; Choice of 1 litre or 2 litre.

The well-known Paterson graduates are made from transparent polystyrene moulded under strictly controlled conditions to ensure total accuracy. They are of a cylindrical laboratory design giving uniform widely separated markings which are very easy to read.

Resistant to most photographic chemicals; Five sizes, each calibrated in metric, Imperial and US scales; Accurate, easy to read markings.

Removes excess water from the surface of newly processed film, Use in conjunction with Paterson Wetting Agent for best results;

Textured side panels to provide firm grip; Supplied as colour-coded pairs; Shaped shoulder will not slip off dish into solution.

Paterson Changing Bag PTP476

A changing bag is probably the most essential piece of equipment a photographer can carry, and it is also one of the most simple. Having a changing bag to hand means that a jammed or partly exposed film can be safely removed from the camera and shooting can continue and it will allow a film to be loaded into a developing tank without having to first find a darkroom. The Paterson changing bag is small enough to fit into a camera bag, yet large enough to allow a camera back to be fully opened once inside or a film to be loaded into a tank. It has a fail-safe double skin with a double zip closure and the inner lining is specially designed to avoid perspiration in prolonged use.

Double zip closure; Elasticised arm apertures; Comfortable lining; Size 685mm x 760mm

Paterson Film Clip Set PTP218

Comprises one weighted clip and one unweighted. The weighted clip is used at the bottom of the film to hold it straight while drying.

Stainless steel pins to grip film securely; Ensures film is held straight while drying.

Paterson Auto Print Washers (For Fibre-Based Papers)

These washers provide the most rapid and efficient method of washing fibre based papers. The print basket which can hold up to 12 prints is agitated by a built in pump which is controlled by water pressure. This ensures that all chemicals are removed from the prints.

Two models are available:
The standard auto print washer handles prints up to 25.4 x 30.5cm (12”x10”)
The major auto print washer handles prints up to 30x40cm (12”x16”)

Specially designed for fibre-based papers. Each print held separately allowing water to wash both sides. Unique agitation system for efficient washing.

Washes RC papers in 2 to 4 minutes; Separators provided to keep small prints apart; Outlet and inlet hose and domestic tap adaptor supplied.

Paterson RC Print Squeegee PTP255

Specially designed to remove surplus water from both sides of prints on resin coated paper for rapid and even drying. The 9in long, soft rubber blades ensure that prints will not be damaged.

Suitable for prints up to 16 x 20in (40.6 x 50.8cm); Made from anti-corrosion materials, resistant to all photographic chemicals; Unique spring loading system on the floating action of one blade; Replacement blades available.

Paterson Rapid Print Drying Rack (for Resin-Coated Papers)

PTP258

Prints on RC paper dry flat quickly in this rack which allows free circulation of air and holds up to 5 prints 12 x 16" (30.5 x 40.6cm) or 10 prints 8 x 10" (20.3 x 25.4cm) or smaller. Special separators ensure minimum contact with the print.

Designed for resin-coated paper; Compact unit, yet holds ten 8 x10" prints.

Paterson Funnel PTP306

Virtually unbreakable in normal use; Resistant to all photographic chemicals; Specially designed to prevent airlocks.